top of page

THE SYSTEM

100% invisible fastening, a unique and patented system.

  • 100% invisible hardware

  • Installation on most ground types or walls

  • Optimal stability

  • Perfect finish

  • Perfect drainage lines

  • Conforms to all standards

  • 20-year warranty on the structure

  • Can be fully disassembled 

  • Mix of wood boards and ceramic tiles possible

  • 100% Made in Europe

1641_1194_UP+_PR39 120_210X297_300DPI.png

100% REMOVABLE
board by board at any time,
thanks to the

DISMANTLING KEYS

PRE-MOUNTED CLIPS

to attach boards by clipping,  and without screws

ALUMINIUM RAILS

Five rail styles to accommodate all applications (floor types / heights)

PEDESTALS AND BOOSTERS

add up to 325 mm in height

1483_REMOV CLIP_20x20 300dpi.png
Fixations invisibles_4x.png

Invisible Fixings

Luxury Finish

Boards clip directly onto the Grad® system removing any need for nails or screws leaving a sleek uninterupted finish.

Aesthétique et alignement parfait_4x.png

Effortless Precision

The unique concept of pre-equipped rails ensures perfect alignment on every installation.

Rapidité de pose sur chantier_4x.png

50% faster to install

Thanks to the Grad® system's innovative design, installation times are more than 50% faster than traditional decking, cladding and paving.

Easy.png

Easy to Learn

The easy to fit system means training is quick and easy and mistakes are minimised.

Long life.png

Longer Life

Engineered to warp less and survive longer in better condition due to improved ventilation and water management.

HEART OF THE SYSTEM

ALUMINIUM

The 6060 alloy used for Grad® rails has excellent mechanical properties for structural use, allowing the systems to be installed for decking and in façades, even in very exposed environments. This alloy also has a very good resistance to corrosion in outdoor environments near the seaside and in swimming pool areas.

INTERNAL RECYCLING OF SCRAP METAL

Thanks to its high recycling capacity, aluminium is a true energy asset and is integrated into the heart of the circular economy. Recycling is essential, so we apply the necessary sorting instructions to give new life to aluminium scrap.

GRAD-BILLETTE-ALUMINIUM_edited.jpg

RECYCLED & RECYCLABLE

Because it can be recycled over and over again, using recycled aluminium saves 95% of the energy and 70% of the water needed to produce primary aluminium. Since aluminium does not lose any of its qualities during the recycling process, this material makes it possible to approach our goal of zero waste in the long term.

ENVIRONMENT
We manufacture products whose recycling and reuse of materials minimizes our environmental footprint and preserves natural resources.

EUROPEAN PRODUCTION

THE GRAD® CLIP

Injected in-house from POLYOXYMETHYLENE (POM)

1483_REMOV CLIP_20x20 300dpi.png

INVISIBLE FASTENING SYSTEM

The Grad® system is recognized as conforming to the requirements of DTU 41-2 (cladding) as well as to the requirements of DTU 51-4 (decking).

FULLY REMOVABLE

It is as easy to unclip a board as to clip it, thanks to keys developed to pass between two boards, and to insert between the aluminium rail and the lugs of the clips. The boards, clips and frame are not damaged, and everything is re-positionable without difficulty.

100% FRENCH PRODUCTION

All of our POM products are made in Alsace (Eastern France)

IMG_5598.JPG

100% RECYCLABLE

RESISTANT

The Grad® system has been tested in labs (the Grad® lab and conformity labs) and, thanks to its high tensile strength, it can be used on buildings of 10 m and 28 m, even in areas that are highly exposed to wind.

RESOURCE EFFICIENCY

We have updated our injection moulding machines by replacing the energy-intensive hydraulic presses with low-consumption electric presses. In addition, air heaters have been installed in the injection moulding shop to heat the production area with the heat recovered from the cooling circuit of the injection moulding machines.

1185_FLAT RAIL_MI RAIL MI CLIPS.jpg
bottom of page